高等学校化学学报 ›› 2012, Vol. 33 ›› Issue (10): 2141.doi: 10.7503/cjcu20120503

• 研究论文: 无机化学 • 上一篇    下一篇

以季磷化合物为模板剂合成超大孔分子筛ITQ-33

钱昆, 宋晓伟, 徐达, 李激扬   

  1. 吉林大学无机合成与制备化学国家重点实验室, 长春 130012
  • 收稿日期:2012-05-28 出版日期:2012-10-10 发布日期:2012-09-12
  • 通讯作者: 李激扬, 女, 博士, 教授, 博士生导师, 主要从事分子工程学研究. E-mail: lijiyang@jlu.edu.cn E-mail:lijiyang@jlu.edu.cn
  • 基金资助:

    国家自然科学基金(批准号: 20871051)资助.

Synthesis and Characterization of Extra-large 18-Ring Zeolite ITQ-33 Using Phosphonium as Structure-directing Agent

QIAN Kun, SONG Xiao-Wei, XU Da, LI Ji-Yang   

  1. State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun 130012, China
  • Received:2012-05-28 Online:2012-10-10 Published:2012-09-12

摘要:

以四丁基氢氧化磷为模板剂, 在中温水热条件下, 利用浓溶胶法合成了具有一维18元环孔道的含铝硅锗酸盐分子筛ITQ-33. 系统研究了ITQ-33的合成条件, 并利用原位变温X射线衍射(XRD), 扫描电子显微镜(SEM), 固体核磁共振波谱(NMR), 电感耦合等离子体发射光谱(ICP), 氮气吸附-脱附程序升温脱附(TPD), 热重(TG)及元素分析等手段对其结构、 稳定性及催化性能进行了表征. 结果表明, 以季磷化合物为模板剂可以合成含铝的ITQ-33纯相, 产物具有较高的热稳定性, 其骨架结构可以稳定至400℃以上, 煅烧后的ITQ-33具有Lewis酸位点, 在酸催化方面有潜在的应用价值.

关键词: 分子筛ITQ-33, 水热合成, 超大孔分子筛, 四丁基氢氧化磷

Abstract:

Extra-large pore zeolite ITQ-33 with 18-rings was prepared using tetrabutylphosphonium hydroxide as structure-directing agent. In situ temperature dependent XRD analysis showed that the framework structure of the as-synthesized product maintains up to 400℃. Its adsorption character was confirmed by N2 adsorption. The influence of synthetic factors in the synthesis of ITQ-33 was studied. The tetrahedrally coordinated Al atoms in the framework lead to the Lewis acid sites.

Key words: Zeolite ITQ-33, Hydrothermal synthesis, Extra-large pore zeolite, Tetrabutyl phosphonium hydroxide

中图分类号: 

TrendMD: