高等学校化学学报

高等学校化学学报 ›› 2006, Vol. 27 ›› Issue (1): 170.

• 研究论文 • 上一篇    下一篇

N,N,N,′N′-四炔丙基-4,4′-二氨基-二苯甲烷与4,4′-联苯二苄叠氮固化动力学研究

罗永红1, 扈艳红1, 万里强1, 薛莲1, 周围1, 黄发荣1, 沈学宁1, 齐会民1, 杜磊2, 陈祥宝3   

  1. 1. 华东理工大学材料科学与工程学院, 超细材料制备与应用教育部重点实验室, 上海 200237;
    2. 中国航天科技集团公司第八研究院,  上海 200233; 3. 北京航空材料研究院, 北京 100095
  • 收稿日期:2005-01-12 出版日期:2006-01-10 发布日期:2006-01-10
  • 通讯作者: 黄发荣(1962年出生), 男, 教授, 博士生导师, 从事特种聚合物及其复合材料研究. E-mail: fhuanglab@ecust.edu.cn
  • 基金资助:

     国家重大基础研究“九七三”计划(批准号: 5131101)、 国家高技术研究发展计划“八六三”计划(批准号: 2002AA305103)和武器装备预研基金(批准号: 51412020103QT3111)资助.

Cure Kinetics Study of the Polymerization of N,N,N′N′-Tetrapropargyl-p,p′-Diamino Diphenyl Methane with 1,1′-Bezidomethyl-4,4′-biphenyl

LUO Yong-Hong1,  HU Yan-Hong1,  WAN Li-Qiang1,  XUE Lian1,  ZHOU Wei1, HUANG Fa-Rong 1* ,  SHEN Xue-Ning1,  QI Hui-Min1,  DU Lei 2, CHEN Xiang-Bao3   

  1. 1. Key Laboratory for Ultrafine Materials of Ministry of Education, School of Material Science and Engineering,
    East China University of Science and Technology, Shanghai 200237, China; 2. The Eighth Academy of China Aerospace Corporation, Shanghai 200233, China; 3. Beijing Institute of Aeronautical Materials, Beijing 100095, China
  • Received:2005-01-12 Online:2006-01-10 Published:2006-01-10
  • Contact: HUANG Fa-Rong ,E-mail: fhuanglab@ecust.edu.cn

PDF (PC)

摘要：

分别利用FTIR和DSC技术对由N,N,N′,N′-四炔丙基-4,4′-二氨基-二苯甲烷(TPDDM)与4,4′-联苯二苄叠氮(BAMBP)形成的一种新型三唑树脂的固化反应及其动力学进行了研究. TPDDM与BAMBP通过1,3-偶极环加成反应形成三唑五元环结构的聚合物, 固化起始温度约为70 ℃, 体系在较低温度下即可固化.  反应体系的固化反应是一级反应, 采用DSC法与FTIR法分别获得了表观聚合反应动力学参数， 其结果具有一定的可比性.

关键词: TPDDM; BAMBP; 1,2,3-三唑聚合物; 固化反应动力学

Abstract:

A novel low temperature curing  resin was prepared by the 1,3-dipolar cycloaddition polymerization of N,N,N′,N′-tetrapropargyl-p,p′-diamino diphenyl methane(TPDDM) and 1,1′-bezidomethyl-4,4′-biphenyl(BAMBP) at 70 ℃. The variation of TPDDM with BAMBP of the reactively functional groups during the polymerization was traced by FTIR, the polymerizing reaction of TPDDM with BAMBP and the reaction kinetics were investigated  using FTIR and differential scanning calorimetry(DSC) at a variety of heating rates. The kinetic parameters at different temperatures including the reaction order, activation energy and pre-exponential factor were obtained. The apparent  reaction order n,  activation energy Ea and  pre-exponential factor A calculated from FTIR and DSC data were mutually evidential.

Key words: TPDDM;  BAMBP; 1,2,3-Polytriazole; Curing kinetics

中图分类号: 

TrendMD: