高等学校化学学报 ›› 2009, Vol. 30 ›› Issue (6): 1227.

• 研究快报 • 上一篇    下一篇

低聚乙烯链在碳纳米管侧壁上的图案化吸附

刘佳, 赵莉, 吕中元, 李泽生   

  1. 吉林大学理论化学研究所, 国家理论计算重点实验室, 长春 130023
  • 收稿日期:2009-01-13 出版日期:2009-06-10 发布日期:2009-06-10
  • 通讯作者: 李泽生, 男, 博士, 教授, 博士生导师, 主要从事理论化学基础理论及应用研究. E-mail: zeshengli@hit.edu.cn
  • 基金资助:

    国家自然科学基金( 批准号: 20333050, 20303007) 资助.

Patterning Adsorption of Polyethylene Oligomer on the Side-wall Carbon Nanotubes

LIU Jia, ZHAO Li, LÜ Zhong-Yuan, LI Ze-Sheng*   

  1. State Key Laboratory of Theoretical and Computational Chemistry, Institute of Theoretical Chemistry, Jilin University, Changchun 130061, China
  • Received:2009-01-13 Online:2009-06-10 Published:2009-06-10
  • Contact: LI Ze-Sheng, E-mail: zeshengli@hit.edu.cn
  • Supported by:

    国家自然科学基金( 批准号: 20333050, 20303007) 资助.

摘要:

本文利用经典动力学模拟, 在纳米尺度上对低聚乙烯链(PE)在含有异质结的CNTs上的吸附进行了研究. 模拟计算结果表明, PE链在CNTs侧壁吸附所形成的构象与它和CNTs的尺寸匹配度有很大关系, 仅当PE链与CNTs的尺寸相匹配时, 才能形成规整的图案化构象, 成为良好的自组装结构. 这对纳米尺度的图案化控制很有意义.

关键词: 尺寸匹配度, 碳纳米管, 低聚乙烯, 吸附, 分子动力学模拟, 异质结

Abstract:

The patterning adsorption of the polyethylene oligomer(PE) on the side-wall of carbon nanotubes(CNTs) composed of CNT(5,5), CNT(10,0) and heterojunction was researched using the classical molecular dynamic simulation. The configuration of the PE chains on the side-wall of the CNTs depended on the dimensional matching of PE and CNT mostly. The patterning adsorption was presented when the length of the PE chains and the pure CNT part matched.

Key words: Dimensional matching, Carbon nanotube, Polyethylene, Adsorption, Molecular dynamics simulation, Heterojunction

TrendMD: