新方法制备不溶性丝素薄膜及其性质研究

高等学校化学学报 ›› 2004, Vol. 25 ›› Issue (9): 1752.

新方法制备不溶性丝素薄膜及其性质研究

吕强, 曹传宝, 张瑛, 马西兰, 朱鹤孙

北京理工大学材料科学研究中心, 北京100081

收稿日期:2003-08-05 出版日期:2004-09-24 发布日期:2004-09-24
基金资助:
国家“九七三”计划项目(批准号:G1999064705);国家“八六三”项目(批准号:2002AA326030)资助

Preparation and Properties of Insoluble Fibroin Films by Novel Method

Lv Qiang, CAO Chuan-Bao, ZHANG Ying, MA Xi-Lan, ZHU He-Sun

Research Center of Material Science, Beijing Institute of Technology, Beijing 100081, China

Received:2003-08-05 Online:2004-09-24 Published:2004-09-24

摘要/Abstract

摘要： 报道一种制备不溶性丝素蛋白薄膜的新方法.在温和搅拌下,将丝素溶液浓缩至16%,通过调整干燥温度和干燥速率,直接获得不溶于水的丝素薄膜.薄膜结构通过FTIR-ATR和XRD测定,同时对薄膜的机械性能进行研究.结果表明,丝素薄膜在干燥温度高于60℃时,有充足的β折叠结构存在,机械性能良好.当干燥温度为70℃时,材料的拉伸强度和断裂伸长率分别为29.8MPa和59.6%,远远强于经过甲醇处理的丝素薄膜的机械性能.当干燥温度高于60℃时,材料在水中具有优异的稳定性.由于在丝素薄膜的制备中避免了甲醇的使用并使材料具有更好的机械性能,此方法制备的丝素薄膜更为安全,应用会更广泛.

关键词: 丝素蛋白, 机械性能, 不溶性

Abstract: A novel method for preparing the insoluble fibroin films was developed. After the fibroin solution was concentrated to about 16% with mild stirring at 45-50℃, the insoluble fibroin films could directly obtained by adjusting drying temperature and drying rate. The FTIR-ATR, XRD were used to study the structure change of fibroin films. The physical and mechanical properties were investigated to discover the feasibility of using these films as biomedical materials. When the fibroin obtained at above 60℃, abundant β-sheet crystal existed in fibroin films. The tensile strength and breaking elongation of films dried at 70℃ were 29.8 MPa and 59.6%, which distinctly superior to the fibroin films treated with methanol. Considering the excellent mechanical properties and avoidance of methanol treatment, the fibroin films prepared with this method were more useful and safer.

Key words: Fiboin films, Mechanical property, Insoluble

中图分类号:

O631

TrendMD:

吕强, 曹传宝, 张瑛, 马西兰, 朱鹤孙. 新方法制备不溶性丝素薄膜及其性质研究. 高等学校化学学报, 2004, 25(9): 1752.

Lv Qiang, CAO Chuan-Bao, ZHANG Ying, MA Xi-Lan, ZHU He-Sun . Preparation and Properties of Insoluble Fibroin Films by Novel Method. Chem. J. Chinese Universities, 2004, 25(9): 1752.

参考文献

[1] 　Grego ry H.A ltm an,R ebecca L.Ho ran,H elen H.L u et al..B iom aterials[J],2002,23(20):4131—4141 [2] 　Su san Sofia,M ary Beth M ccarthy,Glo ria Gronow icz et al..Jou rnal of B iom ed ical M aterials R esearch[J],2001,54(1):139—148 [3] 　J in N.,Young H.P..Jou rnal of A pp lied Po lym er Science[J],2001,81:3008—3021 [4] 　T sukada M asuh iro,Go toh Yoko,N agu ra M asaobu et al..Jou rnal of Po lym er Science,Part B:Po lym er p hysics[J],1994,32(5):961—968 [5] 　L I Gu i-Yang(李贵阳),ZHOU P ing(周平),SU N Yao-J un(孙尧俊)et al..Chem.J.Ch inese U n iversities(高等学校化学学报)[J],2001,22(5):860—862 [6] 　SU N Yu-Yu(孙玉宇),L IU Yong-Cheng(刘永成),M A M ing-H ua(马明华)et al..Chem.J.Ch inese U n iversities(高等学校化学学报)[J],1998,19(1):135—138 [7] 　O leg N.T retinn ikov,Yasu sh i T am ada.L angm u ir[J],2001,17(23):7406—7413 [8] 　A n shu Bagga M athu r,A lan Tonelli,T hom as R athke et al..B iopo ly.[J],1997,42(1):61—74 [9] 　YAO J in-Rong(姚晋荣),CH EN X in(陈新),ZHOU P ing(周平)et al..Chem.J.Ch inese U n iversities(高等学校化学学报)[J],2003,24(11):2113—2115 [10] 　T subo i Y.,Ikejiri T.,Sh iga S.et al..A pp lied Physics A:M aterial Science and P rocessing[J],2001,73:637—640 [11] 　Yasu tom o N o ish ik i,Yo sh iharu N ish iyam a,M asah isa W ada et al..J.A pp l.Po lym.Sc.i[J],2002,86(13):3425—3429 [12] 　Kw eon H.Y.,Park S.H.,Yeo J.H.et al..J.A pp l.Po lym.Sci.[J],2001,80(10):1848—1853 [13] 　Yuyu Sun,Zhengzhong Shao,M inghua M a et al..J.A pp l.Po lym.Sci.[J],1997,65(5):959—966 [14] 　H aeyong Kw eon,H yun Chu i H a,In Chu l U m et al..Jou rnal of A pp lied Po lym er Science[J],2001,80(7):928—934 [15] 　J in H.J.,D avid L.K..N atu re[J],2003,424:1057—1061