高等学校化学学报 ›› 2013, Vol. 34 ›› Issue (3): 621.doi: 10.7503/cjcu20120674

• 物理化学 • 上一篇    下一篇

嵌段序列对聚合物囊泡形成过程影响的Monte Carlo模拟

樊娟娟2, 韩媛媛1, 姜伟1   

  1. 1. 中国科学院长春应用化学研究所, 高分子物理与化学国家重点实验室, 长春 130022;
    2. 吉林农业大学信息技术学院, 长春 130118
  • 收稿日期:2012-07-17 出版日期:2013-03-10 发布日期:2013-02-18
  • 通讯作者: 韩媛媛,女,博士,助理研究员,主要从事高分子自组装行为的模拟研究.E-mail:yyhan@ciac.jl.cn E-mail:yyhan@ciac.jl.cn
  • 基金资助:

    国家自然科学基金(批准号:50921062,21004063)、吉林省科技发展计划项目(批准号:201201096)和吉林农业大学科研启动基金(批准号:201212)资助.

Monte Carlo Simulation of Effect of Block Sequence on Kinetics of Vesicle Formation of Polymers

FAN Juan-Juan2, HAN Yuan-Yuan1, JIANG Wei1   

  1. 1. State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China;
    2. College of Information Technology, Jilin Agricultural University, Changchun 130118, China
  • Received:2012-07-17 Online:2013-03-10 Published:2013-02-18

摘要:

采用Monte Carlo模拟方法研究了具有相同链长和组分比的不同嵌段序列的AB两嵌段共聚物与ABA三嵌段共聚物在选择性溶剂中形成囊泡的动力学过程. 模拟结果表明, AB两嵌段共聚物囊泡的形成与ABA三嵌段共聚物囊泡的形成的动力学过程不同. 在慢速退火条件下, ABA三嵌段共聚物囊泡是通过亲水链段向胶束的表面和中心扩散而形成的, 而AB两嵌段共聚物囊泡则由片层弯曲闭合而形成. 相对而言, 退火速度对AB两嵌段共聚物囊泡形成的动力学过程没有显著影响, 其改变仅影响亲水链段与疏水链段发生相分离的难易程度. 当退火速度较快时, 亲水链段和疏水链段发生相分离的速度较快且相分离发生在囊泡形成之前; 而当退火速度较慢时亲水链段和疏水链段之间的相分离在囊泡形成之后仍在进行.

关键词: Monte Carlo模拟, 嵌段序列, 囊泡, 两亲性嵌段共聚物

Abstract:

We studied the kinetics of the vesicle formation of ABA and AB amphiphilic block copolymers, which have the same chain length and composition but different block sequence, in selective solvent. The simulation results show that the kinetic of the formation of AB diblock copolymer vesicle is different from that of ABA triblock copolymer vesicle. At slow annealing rate, ABA triblock copolymer vesicles are formed via hydrophilic molecules diffusion into the center of spherical micelles, whereas AB diblock copolymer vesicles are formed via oblate membrane closing. The annealing rate does not affect the pathway of spontaneous vesicle formation of AB diblock copolymers. Vesicles of AB diblock copolymers in selective solvent are more likely to be formed by membrane closing. Annealing rates only affect microphase separation process between hydrophobic and hydrophilic blocks. At quick annealing rate, the phase segregation between hydrophobic and hydrophilic blocks is relatively quick and occurs before the formation of vesicle. However, the phase segregation is relatively slow at slow annealing rate and occurs after the formation of vesicle.

Key words: Monte Carlo simulation, Block sequence, Vesicle, Amphiphilic block copolymer

中图分类号: 

TrendMD: