[1] |
Vishkaei M. S., Salleh M. A. M., Yunus R., Biak D. R. A., Danafar F., Mirjalili F., J. Compos. Mater., 2011, 45(18), 1885—1891
|
[2] |
Ren F.Z., Fabrication and Performance of Short Carbon Fiber Reinforced Magnesium-based Composite, Chongqing University, Chongqing, 2011
|
|
(任富忠. 短碳纤维增强镁基复合材料的制备及其性能的研究, 重庆: 重庆大学, 2011)
|
[3] |
Tiedje E. W., Guo P., J. Mater. Civil. Eng., 2014, 26(7), 06014013-1—06014013-4
|
[4] |
Giraud I., Franceschi-Messant S., Perez E., Lacabanne C., Dantras E., Appl. Surf. Sci., 2013, 266, 94—99
|
[5] |
Wen J., Xia Z., Choy F., Compos. Part B: Eng., 2011, 42(1), 77—86
|
[6] |
Vogt-Birnbrich B., Awokola M. G., Beyers H., Aqueous Dispersions of Epoxy Resins, US 6258875 B1, 2001-07-10
|
[7] |
Li J., Li P., Cai Q., Yang X. P., New Chemical Materials, 2015, 43(1), 178—181
|
|
(李晋, 李鹏, 蔡晴, 杨小平. 化工新型材料 2015, 43(1), 178—181)
|
[8] |
Su Y. Q., Tang B. J., Dong A. Q., Zhao Y., Zhang Z. G., Acta Materiae Compositae Sinica, 2011, 28(6), 80—85
|
|
(苏玉芹, 汤冰洁, 董安琪, 肇研, 张佐光.复合材料学报, 2011,28(6), 80—85)
|
[9] |
Yuan C. D., Duan C. H., Xu Y. S., Cao T. Y., Thermosetting Resin, 2007, 22(2), 19—22
|
|
(袁才登, 段春华, 许涌深, 曹同玉.热固性树脂, 2007,22(2), 19—22)
|
[10] |
Zhang Z. Y., Huang Y. H., Liao B., Cong G. M., Chem. J. Chinese Universities, 2002, 23(5), 974—978
|
|
(张肇英, 黄玉惠, 廖兵, 丛广民.高等学校化学学报, 2002,23(5), 974—978)
|
[11] |
Huang X.X., Preparation of Hydrophobic and Oleophilic Waterborne Epoxy Emulsion and Its Application to Water/Oil Separation Filter Paper, South China University of Technology, Guangzhou, 2012
|
|
(黄相璇. 超疏水/超亲油水性环氧树脂乳液涂层的制备及在油水分离滤纸中的应用研究, 广州: 华南理工大学, 2012)
|
[12] |
Li C., Guo L. M., Technical Textiles, 2011, 29(6), 40—42
|
|
(李超, 郭腊梅.产业用纺织品, 2011,29(6), 40—42)
|
[13] |
GB/T2895-2008, Plastics-polyester Resin-determination of Partial Acid Value and Total Acid Value, Standard Press of China, Beijing, 2008
|
|
(GB/T2895-2008GB/T2895-2008. 塑料聚酯树脂部分酸值和总酸值的测定, 北京: 中国标准出版社, 2008)
|
[14] |
GB/T1677-2008, Determinating the Epoxy Value of Plasticizers, Standard Press of China, Beijing, 2008
|
|
(GB/T1677-2008.增塑剂环氧值的测定, 北京: 中国标准出版社, 2008)
|
[15] |
GB/T22237-2008, Surface Active Agents-determination of Surface Tension, Standard Press of China, Beijing, 2008
|
|
(GB/T22237-2008GB/T22237-2008. 表面活性剂表面张力的测定, 北京: 中国标准出版社, 2008)
|
[16] |
GB/T24368-2009, Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement, Standard Press of China, Beijing, 2009
|
|
(GB/T24368-2009GB/T24368-2009. 玻璃表面疏水污染物检测接触角测量法, 北京: 中国标准出版社, 2009)
|
[17] |
Jung M. J., Ju W. K., Ji S. I., Park S. J., Lee Y. S., J. Ind. Eng. Chem., 2009, 15(3), 410—414
|
[18] |
Yang Y., Cement. Concrete. Res., 2002, 32(5), 747—750
|
[19] |
GB/T1449-2005, Fiber-reinforced Plastic Composites-determination of Flexural Properties, Standard Press of China, Beijing, 2005
|
|
(GB/T1449-2005. 纤维增强塑料弯曲性能试验方法, 北京: 中国标准出版社, 2005)
|
[20] |
JC/T773-2010, Fibre-reinforced Plastics Composites-Determination of Apparent Interlaminar Shear Strength by Short-beam Method, Standard Press of China, Beijing, 2010
|
|
(JC/T773-2010. 纤维增强塑料短梁法测定层间剪切强度, 北京: 中国标准出版社, 2010)
|
[21] |
Deng X., Mammen L., Butt H. J., Vollmer D., Science, 2012, 335(6064), 67—70
|
[22] |
Cheng Q., Tang J., Zhang H., Qin L. C., Chem. Phys. Lett., 2014, 616/617, 35—39
|
[23] |
Sun H., Guo G., Memon S. A., Xu W., Zhang Q., Zhu J. H., Compos. Part A: Appl. S., 2015, 78, 10—17
|
[24] |
Song H. H., Oh H. J., Lee H. C., Kim S. S., Compos. Part. B: Eng., 2013, 45(1), 172—177
|