Chem. J. Chinese Universities

• 研究论文 • Previous Articles     Next Articles

Preparation and Properties of a Novel Poly(ether sulfone) Microcellular Material

WEI Hong1,2, GUAN Shao-Wei1, GUO Mei-Mei1, MA Xiao-Ye1, JIANG Zhen-Hua1   

    1. College of Chemistry, Jilin University, Changchun 130012, China;
    2. Public Basic Department, Beihua University, Jilin 132013, China
  • Received:2006-01-20 Revised:1900-01-01 Online:2007-01-10 Published:2007-01-10
  • Contact: JIANG Zhen-Hua

Abstract: A modified poly(ether sulfone)(PES) was prepared by introducing diallyldihydroxybiphenyl(DA-DHBP) unit into the main chain of PES and microcellular foams of the modified PES were prepared by using supercritical carbon dioxide as the foaming agent. Before radiation crosslinking, the influence of foaming temperature, saturation pressuse, foaming time and transfer time on the microcellular morphology was investigated. The results suggest that the cell diameter increased with increasing the foaming temperature and the cell density reached the maximum at 140 ℃, when the foaming temperature ranged from 110 ℃ to 170 ℃; the cell diameter decreased and the cell density increased with saturation pressuse increased; the foaming time and transfer time almost haven't influenced on the cell diameter and cell density. After radiation crosslinking, the influence of radiation dosage on the microcellular morphology was investigated. The results suggest that the content of gelation increased gradually with the increase of radiation dosage and the radiated sample can remain the microcelllar structure well, even though the radiated sample was heat-treated at 265 ℃ for 10 min.

Key words: Poly(ether sulfone), Microcellular material, Radiation

CLC Number: 

TrendMD: