高等学校化学学报

高等学校化学学报 ›› 1999, Vol. 20 ›› Issue (S1): 22.

• Atomic Spectrometry • 上一篇    下一篇

The Determination of High Purity Niobium and Its Compounds By ICP-AES

LU Bao-Yuan1, QIU Li-Wen2, YU Lei3   

  1. 1. Nanjing Institute of Geology and Mineral Resources, Nanjing, 210016, P. R. China;
    2. State Key Lab. of Mineral Deposit Research, Nanjing University, Nanjing, 210093, P. R. China;
    3. Department of Chemistry, Nanjing University, Nanjing, 210093, P. R. China
  • 出版日期:1999-12-31 发布日期:1999-12-31

The Determination of High Purity Niobium and Its Compounds By ICP-AES

LU Bao-Yuan1, QIU Li-Wen2, YU Lei3   

  1. 1. Nanjing Institute of Geology and Mineral Resources, Nanjing, 210016, P. R. China;
    2. State Key Lab. of Mineral Deposit Research, Nanjing University, Nanjing, 210093, P. R. China;
    3. Department of Chemistry, Nanjing University, Nanjing, 210093, P. R. China
  • Online:1999-12-31 Published:1999-12-31

PDF (PC)

摘要：

Niobium and its compounds have many uses in metallurgical, electrical,communication and a lot of high technical fields. It is necessary to set up a fast and correct analytical method, which should be suited to the requirements of products. Under normal conditions, we have to use several testing methods to determine impurity elements in niobium. It took us a tedious analytical time. On the basis of studying niobium spectral lines, we develop the analytical method of determining impurity elements Al, Cr,Cu,Fe, Mo, Ni, Pb,Si, Ta,Ti, W, Zr in high purity niobium by high-resolution sequential ICP spectrometer.

Abstract:

Niobium and its compounds have many uses in metallurgical, electrical,communication and a lot of high technical fields. It is necessary to set up a fast and correct analytical method, which should be suited to the requirements of products. Under normal conditions, we have to use several testing methods to determine impurity elements in niobium. It took us a tedious analytical time. On the basis of studying niobium spectral lines, we develop the analytical method of determining impurity elements Al, Cr,Cu,Fe, Mo, Ni, Pb,Si, Ta,Ti, W, Zr in high purity niobium by high-resolution sequential ICP spectrometer.

TrendMD: