高等学校化学学报 ›› 1994, Vol. 15 ›› Issue (1): 20.

• 研究简报 • 上一篇    下一篇

纯Y型硬脂酸铅LB膜的制备及结构表征

陈海燕1, 彭笑刚1, 于连香1, 周勇亮1, 姜月顺1, 李铁津1, 徐跃2, 高忠民2, 魏诠2   

  1. 1. 吉林大学化学系, 长春, 130023;
    2. 吉林大学测试中心
  • 收稿日期:1993-01-06 修回日期:1993-10-15 出版日期:1994-01-24 发布日期:1994-01-24
  • 通讯作者: 陈海燕,女,28岁,讲师,现在白求恩医科大学工作.
  • 作者简介:陈海燕,女,28岁,讲师,现在白求恩医科大学工作.

Preparation and Structure Characterization of Pure Y-Type LB Films of Lead Stearate

CHEN Hai-Yan1, PENG Xiao-Gang1, YU Lian-Xiang1, ZHOU Yong-Liang1, JIANG Yue-Shun1, LI Tie-Jin1, XU Yue2, GAO Zhong-Min2, WEI Quan2   

  1. 1. Department of Chemistry, Jinlin University, Changchun, 130023;
    2. Center of Analysis and Testing, Jilin University, Changchun
  • Received:1993-01-06 Revised:1993-10-15 Online:1994-01-24 Published:1994-01-24

关键词: 硬脂酸铅, LB膜转移, 硫化铅单层膜

Abstract: The collapse pressure of lead stearate(PbSt2)monolayer on the surface of 10-3mol/L PbCl2 solution(aq) is only 36 mN/m.And higher residual PbCl2 concentration was found within the PbSt2 LBfilms deposited on this subphase.However,the LBfilms with an acceptable composition and higher collapse pressure(about 60 Nm/m) was observed in the case of a lower PBCl2 concentration(<5×10-4mol/L).Pure Y-type transfer form for PbSt2 LBfilms was observed on the subphase with a lower PbCl2 concentration by the use of a faster dipping speed(10 cm/min).By X-ray diffraction measurements,it was determined that the pure Y-type PbSt2 LBfilms possess a certain layer mumber which is same to the value recorded during the deposition period.

Key words: Lead stearate, Transter of LB films, Lead sulfide monolayer

TrendMD: