Chem. J. Chinese Universities ›› 1983, Vol. 4 ›› Issue (5): 571.
• Articles • Previous Articles Next Articles
Zhu Yuanbao, Gong Hongzhong, Zeng Zonghui, Zhou Xiaohui
Received:
Online:
Published:
Abstract: Structure and performance of a H2S gas-sensing electrode and its initial application in printing and dyeing sewage analyses are reported in this paper.The H2S gas-sensing electrode consists of an all-solid state Ag2S membrane indicating electrode and an all-solid state LaF3 reference electrode. The practical linear range of the H2S electrode is within 5×10-8-1×10-2M sulfide solution. The electrode responds to hydrogen sulfide is fast and the reproducibility of measurements is better, Except for higher concentration cyanide, iodide and thiocyanide ion other common anions don't interfere with measurements. If the H2S gas-sensing electrode is used to determine sulfide ion in printing and dyeing sewage (by the addition dilution method), the sample solution does not need any treatment and the electrode will not be contaminated either, because the sensor is hung in air gap over the sample solution. This method is simple, fast, and can be content with requirements of control analyses.
TrendMD:
Zhu Yuanbao, Gong Hongzhong, Zeng Zonghui, Zhou Xiaohui . STUDIES ON STRUCTURE, PERFORMANCE AND ITS INITIAL APPLICATION OF A H2 S GAS-SENSING ELECTRODE[J]. Chem. J. Chinese Universities, 1983, 4(5): 571.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.cjcu.jlu.edu.cn/EN/
http://www.cjcu.jlu.edu.cn/EN/Y1983/V4/I5/571