高等学校化学学报

高等学校化学学报

• 研究论文 • 上一篇    下一篇

热处理对WO3纳米薄膜结构及其气致变色性能的影响

史继超2, 吴广明1, 陈世文1, 沈军1, 周斌1, 倪星元1   

    1. 同济大学波耳固体物理研究所,
    2. 化学系, 上海 200092
  • 收稿日期:2006-09-26 修回日期:1900-01-01 出版日期:2007-07-10 发布日期:2007-07-10
  • 通讯作者: 吴广明

Effect of Annealing Temperature on Structure and Gaschromic Properties of WO3 Thin Films

SHI Ji-Chao2, WU Guang-Ming1*, CHEN Shi-Wen1, SHEN Jun1, ZHOU Bin1, NI Xing-Yuan1   

    1. Pohl Institute of Solid State Physics,
    2. Department of Chemistry, Tongji University, Shanghai 200092, China
  • Received:2006-09-26 Revised:1900-01-01 Online:2007-07-10 Published:2007-07-10
  • Contact: WU Guang-Ming

PDF (PC)

摘要： 以钨粉和过氧化氢溶液为原料, 采用溶胶凝胶法制备了WO3溶胶, 并结合提拉镀膜法, 分别在普通玻璃载玻片和抛光硅片上制备了掺钯气致变色WO3纳米结构薄膜; 并分别在50, 150, 250, 350和450 ℃的空气氛围中对薄膜进行了热处理. 采用IR、双椭圆偏振光谱仪、AFM和XRD分析了薄膜的性质和微观结构, 观察了薄膜的表面形貌, 根据所得数据讨论了不同热处理温度对薄膜的结构和气致变色性能的影响.

关键词: WO3薄膜, WO3薄膜, 热处理温度, 热处理温度, 气致变色, 气致变色

Abstract: WO3 sol(600 mL) was prepared with tungsten powder and 37% H2O2 through the sol-gel method in this paper. WO3 thin films were prepared on silicon chips and ordinary slide glasses via Dip Master method and annealed in ambient air at temperatures of 50, 150, 250, 350 and 450 ℃, respectively. Thickness and refractive index of the WO3 thin films were researched by Spectroscopic Ellipsometer. Surface morphology and microstructure of the films were analyzed with AFM, IR and XRD respectively. The annealing temperature have an important effect on the structure and gaschromic properties of WO3 thin films. At low annealing temperature, WO3 thin films is amorphous and porous structure, and the water of WO3 thin films is appropriate, then this kind of WO3 thin films have a good gaschromic properties.

Key words: WO3 thin Films, WO3 thin Films, Annealing temperature, Annealing temperature, Gaschromic, Gaschromic

中图分类号: 

TrendMD: