高等学校化学学报

• 研究论文 • 上一篇    下一篇

影响液体灌注型表面抗冰耐久性的关键因素

贾 雪1,2, 张光宇3, 刘 宁1,2, 苏朝晖1,2   

  1. 1. 中国科学院长春应用化学研究所, 高分子科学与工程国家重点实验室 2. 中国科学技术大学应用化学与工程学院 3. 中国科学院大学温州研究院
  • 收稿日期:2026-03-17 修回日期:2026-08-31 出版日期:2026-09-09 发布日期:2026-09-09
  • 通讯作者: 苏朝晖

Key Factors Affecting Durable Anti-Icing of Liquid-Infused Surfaces

JIA Xue1,2, ZHANG Guangyu3, LIU Ning1,2*, SU Zhaohui1,2*   

  1. 1. State Key Laboratory of Polymer Science and Technology, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences 2. School of Applied Chemistry and Engineering, University of Science and Technology of China 3. Wenzhou Institute, University of Chinese Academy of Sciences
  • Received:2026-03-17 Revised:2026-08-31 Online:2026-09-09 Published:2026-09-09

摘要: 液体灌注型多孔表面(SLIPS)已成为抗冰应用中一种极具前景的解决方案,但其实际应用常受限于润滑液耗尽导致的抗冰性能丧失。本研究对液体灌注型表面进行了深入探究,并系统探索了影响其耐久性的主要因素。以甲基丙烯酸-2-羟乙酯(HEMA)和甲基丙烯酸-2-乙基己酯(EHMA)为单体合成聚合物,接枝不同量的碳碳双键,再与硅油混合后通过紫外光交联方法制备了一系列液体灌注型表面。通过结冰/除冰循环表征进行耐久性评估,发现了各因素对抗冰性能的影响规律。研究结果表明,耐久性优化不仅可通过适当降低聚合物基体交联密度、提高硅油黏度和含量实现,还可通过对涂层厚度和温度的调控达成。值得注意的是,在众多影响因素中,温度对液体灌注型表面抗冰耐久性的影响最为显著。

关键词: 耐久性, 抗冰, 液体灌注型表面, 润滑, 交联密度

Abstract: Slippery Liquid-Infused Porous Surfaces (SLIPS) have emerged as a highly promising solution for anti-icing applications. However, their practical implementation is often limited by the loss of anti-icing performance caused by lubricant depletion. In this study, liquid-infused surfaces were systematically investigated, and the major factors affecting their durability were explored. Using 2-hydroxyethyl methacrylate (HEMA) and 2-ethylhexyl methacrylate (EHMA) as monomers, polymers were synthesized and grafted with varying amounts of carbon–carbon double bonds. A series of liquid-infused surfaces were then fabricated via UV-induced crosslinking after mixing with silicone oil. The durability was evaluated using icing/de-icing cycling tests, and the effects of various factors on anti-icing performance were identified. The results demonstrate that durability can be enhanced not only by appropriately reducing the crosslinking density of the polymer matrix and increasing the viscosity and content of silicone oil, but also by regulating coating thickness and temperature. Notably, among all influencing factors, temperature exhibits the most significant effect on the anti-icing durability of liquid-infused surfaces.

Key words: Durability, Anti-icing, Liquid-infused surface, Lubrication, Cross-linking density

中图分类号: 

TrendMD: